APPLICATIONS: It perfectly fits every air conditioning, such as ductless mini-splits, VRF, heat pumps and centralized air ducted units.

TECHNICAL SPECS:
Polyethylene closed cell foam: assures thermal insulation from surroundings.
ASTM C 1427-07 compliant
Type I (tubular)
Grade I (insulation material for use on typical commercial system non-crosslinked).
Low-density polyethylene foam: closed cells foam, CFC and HCFC gas free
Water vapor permeability: ASTM E96-00 compliant
Working temperature: ASTM C 1427-07 compliant
Wallthickness: 1/2" and 3/4”
Surface burning characteristics: UL 94, top rated – UL 723, ASTM E84 (25/50) compliant, flame and Spread Index less than 25 and Smoke Development Index less than 50 as tested according to UL 723
R-Value: between 6.0 and 4.0 (depending on pipe diameter)


COPPER
Pipes: Manufactured according to ASTM B280
Copper: No. C122200 DHP (phosphorous deoxidized, high residual phosphorous), 99.90%.

SPECIAL FEATURES:
Outer Jacket: additional white polyethylene jacket cover protects foam insulation from tearing during installation process.
Marking: insulation incrementally marked by every foot to ensure accurate initial unit charge.
R410a approved: Gelcopper can be used in applications where high-pressure gases are used as refrigeration source.
UV resistant: Gelcopper is UV resistant.
Paintable: the insulation can be painted to match
the surroundings.

*PDM US recommends product installation under plastic duct to protect it from severe weather conditions, accidental damages or theft.